DRONE UAV UAS SYSTEMS

DRONE UAV UAS Systems
Sort By:  
Used Trimble ZX5 UAV Complete System for sale, Complete Trimble ZX5 System for Land Survey
$3,900.00
Used Trimble UX5 UAS Complete System for sale, in excellent condition, includes Sony NEX-5 16 MP camera, Trimble Yuma II, New unused UX5 wing
$2,700.00
Used Topcon Falcon 8 UAV InspectionPRO for sale, lightly used in excellent ready working order and works flawlessly
$3,175.00
Introducing the mdLiDAR 1000HR aaS payload. By combining the robust and field proven md4-1000 airframe, with a fully integrated high-resolution LiDAR & camera payload from Velodyne, the mdLiDAR1000HR can capture ultra-dense LiDAR data quickly and safely in the field. The Velodyne LIDAR payload utilizes the new Puck Lite sensor which offers increased range and field of view. HR means high resolution point clouds and increased coverage is made easier and more accessible than ever.
$3,250.00
The UAV, designed and manufactured by microdrones, a company based in Germany, was launched in 2010. It features increased operational endurance and payload capabilities. It performed a 25-minute test flight using GPS waypoint navigation across the Alps in June 2013.
$6,250.00
Microdrones mdMapper1000DG aaS will help you to achieve high levels of data accuracy, cover more ground in one flight, use less people and equipment on jobs – all without using ground control points. Conquer large surveying or mapping projects in a fraction of the time and master your geospatial data by putting direct georeferencing to work for you. Significantly reduce your time spent on projects. Deliver unparalleled data quality.
$3,000.00
Used Trimble ZX5 UAV Complete System (Trimble ZX5 UAV Complete System)

Used Trimble ZX5 UAV for sale, Complete Trimble ZX5 System for Land Survey

Still like new, low hours flights used by Pre-owned of Land Surveyors. It is in excellent ready to flight to survey condition

Used Trimble ZX5 UAV System sale includes:

  • Trimble ZX5-SYS-004
  • Tablet with Aerial Imaging application
  • Remote Control
  • Chargers
  • ZX5 Batteries
  • Case

Trimble ZX5 Overview

The Trimble ZX5 is another accurate, reliable tool in Trimble’s family of UAS solutions. Fast to setup and easy to operate, the Trimble ZX5 allows you to quickly collect data in the field so you can generate the dynamic deliverables required for today’s jobs. It requires no launcher, is easy to deploy and includes everything you need to capture high quality georeferenced photos for applications such as aerial mapping and inspections.

  • Vertical takeoff and landing capability allows users to work in tight places and obstructed environments where fixed wing solutions are less suitable.
  • The system can be equipped to capture live video imagery for inspection applications such as civil infrastructure, utilities, and oil and gas pipelines.
  • Simple field-to-office workflows ensure reliable results
  • Easily integrate with other Trimble technology
  • Image Processing

Import your data into Trimble Business Center Photogrammetry Module office software to create detailed orthophotos, digital elevation models, point clouds, volume calculation, 3D models and more without requiring specialized photogrammetry knowledge or experience. Or utilize the state-of-the-art Trimble Inpho UASMaster module for advanced photogrammetric processing. 

Features

  • Outstanding flight stability and performance even in strong winds
  • Includes a 16 MP camera system and flight planning software
  • Image resolution down to 1 mm
  • Light, compact,foldable carbon design
  • Up to 20 minute mission duration and 2 km range
  • Easy data processing in Trimble Business Center Photogrammetry Module or Trimble UASMaster

Specifications:

Hardware

  • Type: Rotary Wing
  • Maximum takeoff mass: 5 kg (11lb)
  • Payload capability: 2.3 kg (5.1lb)
  • Dimensions: 85 x 49 cm; (33.5 x 19.3)
  • Material: Carbon frame structure
  • Propulsion: Electric pusher propeller; 6 brushless motor
  • Battery: 2x 6600 mAh 14.8 V
  • Camera: 16 MP with interchangeable 14mm lens

Software

  • Project management: √
  • Mission planning: multiple flight
  • Automated pre-flight checks: √
  • Automatic take off, flight and landing: √
  • Autonomous camera triggering: √
  • Automated fail-safe routines: √
  • User controlled fail-safe commands: √

 Operation

  • Endurance: 20 min
  • Maximum ceiling2: 3000 m (9,843 ft) AMSL
  • Pre-flight setup time: 5 min
  • Take off type: Vertical
  • Landing type: Vertical
  • Weather limit: Stable in winds up to 36 km/h (22 mph)
  • Communication & control frequency: 2.4 GHz
  • Communication & control range: up to 2 km (1.2 miles)
  • Video Frequency: 5.0 GHz
  • Live Video Stream Resolution: 480i
  • Recordable Video Resolution: 1080p30

Acquisition Perfomance

  • Resolution (GSD): 1.0 mm to 19.5 cm (0.04 -7.7 in), depending on height above ground level (AGL) and less
  • Flight AGL range: 5 - 750 m (16.5 - 2,460 ft)
Used Trimble ZX5 UAV Complete System for sale, Complete Trimble ZX5 System for Land Survey
$3,900.00
Used Trimble UX5 UAS Complete System (Trimble UX5 UAS Complete System )

Used Trimble UX5 UAS Complete System for sale, in excellent condition, includes Sony NEX-5 16 MP camera, Trimble Yuma II, New unused UX5 wing

This is Complete Trimble UX5 Unmanned Aerial System sale includes;

  • Trimble UX5 with Ebox
  • Trimble Yuma II Tablet with Access Aerial Imaging software
  • Sony Nex-5, 16 MP camera
  • Trimble Launcher
  • Chargers
  • Two UX5 Batteries
  • Aluminum Trimble case
Used Trimble UX5 UAS Complete System for sale, in excellent condition, includes Sony NEX-5 16 MP camera, Trimble Yuma II, New unused UX5 wing
$2,700.00
Used Topcon Falcon 8 UAV InspectionPRO (Topcon Falcon 8 UAV InspectionPRO)

Topcon Falcon 8 UAV InspectionPRO for sale, lightly used in excellent ready working order and works flawlessly

Only used as a demo unit, still like new, has been shop tested and checked by authorized Topcon service.

Used Topcon Falcon 8 UAV InspectionPRO sale includes:

  • Topcon Falcon 8 Aircraft / Drone
  • Operating license for Falcon 8 inspection features and functionality
  • Operating license for Falcon 8 survey features and functionality
  • Mobile ground station
  • Panasonic Lumix DMC-TZ71 with remote controlled 30x optical zoom (24-720 mm)
  • FLIR TAU 640 Payload (Capable of both RGB and Thermal image capture)
  • Video goggles, ”Fatshark V2”
  • Independent camera control
  • Battery charger
  • 2x LiPo safe bag
  • 6x batteries
  • Transport case
  • Sony Alpha 7R with ZEISS lens (Sonnar T FE 35 mm F/2.8 ZA) 

The inspection and monitoring model of the Falcon 8, the InspectionPRO, includes the Panasonic Lumix TZ71 and the FLIR TAU 640 2. With remote controlled 30x optical zoom (24-720 mm), the Panasonic Lumix DMC TZ71 produces high-resolution images from a safe distance. The high sensitivity CMOS sensor and the excellent display processing unit provide luminous photo quality. The FLIR TAU 640 2 simultaneous captures images at 640 x 512 pixels, includes second generation Digital Detail Enhancement and makes ?ight times of over 20 minutes possible. Even small thermal leaks or defects on solar power plants can be detected from long distances

Topcon Falcon 8 Overview

The Topcon Falcon 8 powered by Ascending Technologies is a rotary-wing UAS designed for inspection and monitoring or survey and mapping applications, depending on which camera payloads are used. Rotary-wing UASs are best applied to smaller scale projects and those for which ?exibility for take-off and landing or oblique perspective is required. The Falcon 8 offers the ?exibility to get into small spaces and compromising situations often presented in inspection and monitoring applications. Due to its best-in-class sensors, active vibration damping and actively compensating camera mount, the Falcon 8 is well suited for smaller mapping and inspection projects up to 35 hectares that require high resolution imaging.

The Falcon 8 InspectionPRO model Payload consists of an RGB camera and IR sensor (Panasonic Lumix DMC-TZ71 + FLIR TAU 640) or the video camcorder (Sony HDR-PJ810E) for inspection and monitoring applications.

Falcon 8 InspectionPRO

  • Bridge and inspection survey
  • Onshore and offshore inspections
  • Windpark inspection
  • Visual inspection of structural integrity
  • Industrial indoor/outdoor inspection
  • Solar park inspection
  • Structural condition assessment operations
Used Topcon Falcon 8 UAV InspectionPRO for sale, lightly used in excellent ready working order and works flawlessly
$3,175.00
Used Microdrones mdLiDAR 1000HR aaS Payload (Microdrones mdLiDAR 1000HR aaS Payload)
PROVEN INDUSTRY LEADING DRONE LiDAR SURVEY EQUIPMENT AND SOFTWARE. HR means high resolution pointclouds and increased coverage is made easier and more accessible than ever. This is the UAV, hardware, software, workflow, training and support that surveying professionals need. LiDAR + mdaaS + EASY TO USE mdInfinity SOFTWARE = EXTREME GEOSPATIAL PRODUCTIVITY, NOW IN HIGH RESOLUTION Microdrones has developed an end-to-end LiDAR solution combining a drone, a LiDAR payload, a fully integrated LiDAR processing and photogrammetry software workflow, and world class support to consistently provide quality deliverables. mdLiDAR1000HR is a fully integrated system for producing 3D point clouds optimized for land surveying, construction, oil & gas and mining applications. mdLidar1000HR with a 90 degree field of view for both scanned points and imagery, repeatedly provides a precision of 1.6 cm (.052 ft) at 1-σ when flown at 40 m (130 ft) at a speed of 8 m/s (18 mph). Improved image acquisition precisely configured to match 90 degree laser scanner field of view enables compatibility with streamlined point cloud colorization and FORMap data processing modules within the mdInfinity platform. Each LiDAR channel of the mdLiDAR1000HR was boresight calibrated to improve the data consistency, therefore providing a reduced Standard Measurement Uncertainty. Simple mission planning using mdCockpit User selects flying height, drone speed and LiDAR strip overlap Fully automated mission execution, realtime monitoring, and flight control using mdCockpit Thorough georeferencing data processing using the Applanix APX-15 UAV DG and mdInfinity Software Automated final point cloud processing using mdInfinity processing software Final point cloud in standard ASPRS LAS format, View your deliverable in mdInfinity software, or export to use within any GIS or CAD software environment that you currently use. WHO SHOULD CONSIDER THIS SYSTEM: Professionals responsible for geospatial data collection should consider mdLiDAR1000HR to support the following tasks. Digital Twin Creation and Maintenance Corridor mapping Mining (volume calculation) Construction site monitoring Environmental changes (time series) Forestry Contour mapping Planning, Leveling, Excavation Archaeology and cultural heritage Highway construction Precision Agriculture
Introducing the mdLiDAR 1000HR aaS payload. By combining the robust and field proven md4-1000 airframe, with a fully integrated high-resolution LiDAR & camera payload from Velodyne, the mdLiDAR1000HR can capture ultra-dense LiDAR data quickly and safely in the field. The Velodyne LIDAR payload utilizes the new Puck Lite sensor which offers increased range and field of view. HR means high resolution point clouds and increased coverage is made easier and more accessible than ever.
$3,250.00
Used Microdrones MD-1000 UAV D-Type Airframe w/ MDLIDAR 1000HR Payload (Microdrones MD-1000 UAV D-Type Airframe)
Robust, powerful, stable and dependable. Build your business on this versatile platform, now with 10% increased motor efficiency as part of the GE Industrial line. Introducing the mdLiDAR1000HR aaS with High Resolution Velodyne Payload. By combining the robust and field proven md4-1000 airframe, with a fully integrated high-resolution LiDAR & camera payload from Velodyne, the mdLiDAR1000HR can capture ultra dense LiDAR data quickly and safely in the field. The Velodyne LIDAR payload utilizes the new Puck Lite sensor which offers increased range and field of view. mdLiDAR1000HR aaS: HR means high resolution pointclouds and increased coverage is made easier and more accessible than ever. This is the UAV, hardware, software, workflow, training and support that surveying professionals need- now with convenient mdaaS plans!
The UAV, designed and manufactured by microdrones, a company based in Germany, was launched in 2010. It features increased operational endurance and payload capabilities. It performed a 25-minute test flight using GPS waypoint navigation across the Alps in June 2013.
$6,250.00
Used Microdrones MD4-1000 UAV C-Type Airframe w/ MDMAPPER 1000DG Payload (Microdrones MD4-1000 UAV C-Type Airframe)
Microdrones MD-1000 UAV C-Type Airframe w/ MDMAPPER 1000DG Payload Includes: Microdrones MD-1000 C-Type Airframe Microdrones mdMapper 1000DG aaS Payload Sony RX1R II Professional Compact Camera with 35mm Sensor Sony NP-BX1 Battery Data Transfer Cable SD Card Reader Battery Charger mdRC Remote Controller with accessories Power Peak Battery Charger Microdrones Rugged Transport Case for DG Payload Microdrones Rugged Transport Case for MD-1000 C-Type Airframe
Microdrones mdMapper1000DG aaS will help you to achieve high levels of data accuracy, cover more ground in one flight, use less people and equipment on jobs – all without using ground control points. Conquer large surveying or mapping projects in a fraction of the time and master your geospatial data by putting direct georeferencing to work for you. Significantly reduce your time spent on projects. Deliver unparalleled data quality.
$3,000.00
Per Page      1 - 6 of 6
  • 1